Simucube 2 True Drive software feedback thread

We are not updating that field in the UI at the moment.

1 Like

Are you recalibrating-recentering the wheel every time the 360º error happens to you?
Looks like you saved some profiles with diferent calibrations-centers and TD fails.

When 360º error happens to me, I force the wheel to the original center point and change to another profile with the good center point. All my profiles have the same centerpoint

Edit: add to my comment that TD does not like to drag the bars with the mouse, every change is sent to SC2 and its possible to saturate it with lots of changes in a second

No, all my profiles has the same centerpoint. Nothing else would make sense, wouldn’t it?

But you can clearly see that the centerpoint changes while i move a slider.

The bug can happen any time a drive setting changes for me. So that includes touching a slider without going near the save button. The only reliable solution is to boot up, re centre when it inevitably goes off-centre on boot up, choose the correct profile and close the software for the day.

This is all well and good but it really sucks that on the fly changes are made too frustrating to bother with. I can’t believe we are still talking about this bug. Given how “safety conscious” granite is with the low torque boot up and beeps the 360 bug is a glaring error that really could hurt someone by snatching at a finger if someone is not informed on these forums. This bug should be the top priority over all other features.

3 Likes

I’ve also posted something similar a month or 2 ago.
Hit my thumb with quite some fore :frowning:
Link

After all, I do not move my wheel when changing values.

Not a big deal but looks like True Drive executable missing Copyright and version info, it’s all empty.


MMos for comparison

I don’t think center position is part of any profile, it’s on separate tab, most likely global setting.

I know and us, customers, only knows that center posistion is messed up when changing Filters or profiles so there must be some relationship

hi, yesterday for the 1st time i’ve seen error 420001, I cleared it by pressing the estop. it happened while i was testing some bumpstop values, i wanted it to be less hard; so when i was turning all the way to the right to test those values, the wheel went past the bumpstop and the error occoured.
never happend before. i’m on sc2 sport.
also, why the date of my last telemetry update isn’t changing? no matter if I update it every day, it remains like this :
Annotazione%202019-12-08%20192703

We will investigate this for the next version.

1 Like

What is this telemetry ? It’s data for GD ? from the game ?..
I’m still on the 1.0.10… I’m waiting the 1.0.14 to update.

It is anonymous technical data from the device.

1 Like

With upcoming fix for No telemetry consent, will it stop collecting the data and turning off torque?

Yes, but collecting data does not happen when there are force feedback effects active. We will maybe replace the torque off with new torque calculation iterations instead so it will be transparent also when on desktop.

1 Like

Ok, I see.
Thanx Mika ! :+1:

Slightly off topic Mika but I remember you saying before the Summer shutdown that there were some big things in the pipeline for True Drive that you hoped would release later in the year, have we had these updates yet? I’m not in any way disappointed with the wheel as it is, just excited about what else could be squeezed out of it via the software!

We have improvements/additional features to some filters in work, also Reconstruction Filter v2 is gaining development focus, we have a new torque controller coming up, and lots of filters on idea list!

However, while some work has been done, we have not been able to get things to a stage where they would be in a real test version, as we thought we would at this point…

3 Likes

No worries, that’s all pretty exciting! Will sit tight :smiley:

Hello,
the new torque controller it’s a new hardware module or is software based ?.
thank you.

It is the part of the servo drive firmware which calculates the output torque at any given moment.