I just heard that we’ve gotten a wheel that is known to cause this issue. I will be testing that at home later this evening.
thank you very much i will wait for your answer
“Give me a lever and a place to stand and I’ll move the world.” Any vibration you get is going to be magnified. Not excusing your resonance, but your set up is likely to exaggerate whatever vibrations you are getting. Having said that, I’d love to try that set up sometime. I thought I was pushing it with a 125mm spacer
I do not know if my configuration really has to do with the vibration, apparently I am not the only one with this problem, I have had several engines installed here and nothing similar has happened to me, the truth is that the sensation of realisms is quite greater, of done with hight torque enabled disappears completely.
We have just measured the resonance frequency of a Simulaje F1S rim, and it appears that it is somewhat lower than expected. We probably have to change the Resonance Reduction feature on True Drive to extend to even lower frequency.
Do you have True Drive 1.0.10 and the Resonance Reduction on the hardware tab checked? Does it have any effect on the resonance? What if you use a phone app such as https://play.google.com/store/apps/details?id=org.intoorbit.spectrum&hl=en - what resonance frequency are you hearing?
I have this 360 bug again in .10fw
With the marked resonance reduction it does exactly the same, why does it only do it with high torque disabled?
I could not tell you how often it is, but elruido and vibration is unbearable !!!
I bought the gearshift on ebay, but I have changed the knob for a larger one and the rod I put it on carbon, it goes very well
://www.ebay.es/itm/PC-SRS-Sequential-Shifter-Gearshift-SIM-For-Logitech-G25-G27-G29-THRUSTMASTER/303133537105?hash=item46942ab351:m:m-w65v1J7-LxZx6KGDA_W3w
Fixed the link.
1 Like
The Damping filter that is forced on in the safe torque mode will cause this. However also other filters might cause it. It will be fixed in the next version for the wheel that suffers from this issue, but if you can, please try a phone app to see what frequency sound the vibration is happening on your rig with the long shaft. We want to be extra sure that the issue is fixed for 99.9% of the users that are affected.
ok as soon as I have it I will send it, thank you very much
could it be possible to implement a couple of lines under the profile name as a comment to the features of a created profile? for example something like:
profile name : x
notes : xyz
I think it could be very useful instead of having just a short name describing the profile
1 Like
next week I get a new PC. Can I save all profiles externally?
Yes, you can export all of your profiles to a destination if your choice as .ini files.
I do that and then upload them to Google drive just in case my PC decides to die 
Profiles are also saved on the device memory itself.
okay thanks than i have one Problem fewer 
good afternoon, I have the measurement, I used another program because the one you recommended is not for apple
I have a video but I think it can’t be sent here.