oui 12A, c’est normal
et si tu créé un nouveau profil à partir de “simucube 2018”. Il a été modifié il y a quelques semaines par S3
ca va te crééer un profil “simucube 2018 custom”
en dernier recours supprime tous ce qu’il a dans ce dossier
H:\Mes documents\My Games\SimBin\RaceRoom Racing Experience
tu le sauvegardes avant suppression ou tu le renommes en “RaceRoom Racing Experience.old”
sinon, je ne sais pas. Il faut demander à Mika
tu peux aussi essayer de cocher AXI et/ou FBI mais je n’y crois pas
j’avais dû faire ça en passant de mon 10000 au biss-c
Je l ai fait avant , de recréer un profil custom de 2018 et ça n a rien changer
Hier soir j’ ai tout désinstaller pour refaire une installation propre et c est toujours pareil
Je sais plus ou chercher
@Mika. Si jamais tu passe par la , aurais tu une idées du soucis ?
Je pense pas que ça change quelque s choses Hervé de cocher AXI ou FBI car il c est bien installer le biss-c
Et j ai le soucis qu avec raceroom et le paramètre Sinus
moi aussi il était bien installé et je ressentais des crans
bon, c’était pas le même problème que le tien mais cocher ou décocher AXI et/ou FBI avait résolu le problème
mais il y a quelques mois le profil par défaut fonctionnait-il bien avec le sinus ?
quand tu dis que tu as fait une install propre…tu as aussi supprimer …\Mes documents\My Games\SimBin\RaceRoom Racing Experience ?
non je sens pas de crans hors jeu,
non non j ai toujours eu ce soucis avec le Sinus , meme avec le profil de raceroom simucube 2018
pour l install propre , oui j ai supprimer mes documents …my games…
c est pour ca que je vois pas ou est le soucis , mais il me semble meme que bien avant la mise a jour de decembre j avais deja ce soucis avec raceroom, car ca fait longtemps que je roule avec tes rcs , et j avais deja remarquer ce probleme , du coup je mettais l effet de derapage a zero et les effets de jeu dans simucube a zero et je roulais comme ca
je m adapter comme ca ,
OK. Je ne sais pas t’aider plus que ca
Simucube firmware in the released versions might have an issue where the sine effect is being adjusted by the spring effect strength slider. Can you test if this is indeed the case?
thank you Mika for your help, I did the tests, and it didn’t change anything, I even put all the effects on 200, and I still have this vibration
I get a constant vibration (SC2) if I have the in game “Slip Effect” set higher than 3%
Have you tried turning that effect all the way down to see if that makes a difference for you?
@EsxPaul
I tried to lower it to 0, and yes I no longer have vibrations,
my concern comes from the settings effect of swiping in the game,
as soon as I put FFB slip effect = "0.01, it vibrates
my worries come from
but without the effects of stripping, you don’t really feel the car when it slides
@EsxPaul
For test
TEST 1
FFB slip effect=“0.20” // Slip effect, from 0.0 to 1.0
ffb slip freq multiplier=“2.0” // Slip effect frequency. 1.0f = 1 cycle per wheel rev
ffb slip wave type=“1” // Slip effect wave type
TEST 2
Delete this line for test
ffb slip wave type=“0” // Slip effect wave type
I did the tests
c well configure the swipe effect which gives me concerns about vibrations, I put the ffb slip wave type = “0” on 1 and the more vibrations
So it is this effect that worries me
I deleted the complete line, and there I find my vibrations
the concern is when i put the
ffb slip wave type = “0” on 1, the car when I lock the brakes, I no longer have the steering wheel that goes to the right or to the left, we no longer feel the front axle
Hello @mika
we would like to hear your opinion on this subject
A number of players have problems with the “slip effect”
As soon as the value is above 3%, this generates significant vibrations in the steering wheel
if it is 0, they have no vibrations
I do not have this problem and I can increase the value very high without problem
I have a small mige, ioni pro hc and biss-c
we compared a lot of parameters but we don’t understand why some have vibrations whereas I never have these vibrations
people with this problem
@Nono67 : small mige and ioni pro hc and biss-c and simucube 0.50.4. so I have the same configuration
@EsxPaul : simucube 2 pro
@sephiro on racingfr.net : big mige and biss-c and simucube 0.50.4
nota for “ffb slip wave type”
if ffb slip wave type=“0” --> significant vibrations in the steering wheel
if ffb slip wave type=“1” --> no vibrations in the steering wheel but no feeling on the front wheels. we’re losing all information from the front wheels.
Sorry, I have no idea what effect the slip wave type is doing at the moment. I might have time to investigate this, but the backlog of work is long.
It might be using the DirectInput sine wave effect with these default parameters:
FFB slip effect=“0.03” // Slip effect, from 0.0 to 1.0
ffb slip freq multiplier=“2.0” // Slip effect frequency. 1.0f = 1 cycle per wheel rev
ffb slip wave type=“0” // Slip effect wave type
Is you freq value 2.0 or something custom?
I use this settings
FFB slip effect=“0.2” // Slip effect, from 0.0 to 1.0
ffb slip freq multiplier=“2.0” // Slip effect frequency. 1.0f = 1 cycle per wheel rev
ffb slip wave type=“0” // Slip effect wave type
@Nono67 and @sephiro use this settings
FFB slip effect=“0.03” or FFB slip effect=“0.01”
ffb slip freq multiplier=“2.0” // Slip effect frequency. 1.0f = 1 cycle per wheel rev
ffb slip wave type=“0” // Slip effect wave type
for @EsxPaul
I don’t know
That frequency seems off to me, as I have tuned that in the past (from default of 1.0 to about 1.4) to achieve a lower frequency of effect. Still, not sure why that would cause the result being reported.
I have exactly the same vibrations like Nono67 with this effect, same hardware/firmware. The best FFB experience is without any effects. I can feel when the car starts to slides very easy. These effects are usless for me. I don’t know but maybe USB controller is important here? I have USB 3.1 gen.2, one card/controller for the wheel and one for the pedals, this one: https://i-tec.cz/en/produkt/pce2u31ac-2/
@Mirek_kowal
could you share your settings please to give it a try?
simucube and stp game
is the usb port important?