SimuCUBE firmware 0.11 series bug reports

Simucube 1
75

Glad you got it fixed!

76

Howdy,

After a while I turned up my SimuCUBE on and update to latest firmware & software and the wheel feels stiff now to turn after it has phased (Last time I have had the manual centering configured).

I can feel the wheel chattering and even hear some noises from it.

When I put the profile in to safe profile, the wheel does not have the force anymore but when I adjust the overall strength in my current profile, it does not have the same effect.

I have small mige. Any other information I can provide?

Hereā€™s my log after the start up:
https://pastebin.com/Qf6GbEvy

FFB effect creation log:
https://pastebin.com/vJc93L1q

Edited to add that the wheel works in ACC somewhat at least but I am worried about the wheel behavior when not in any driving title.

77

stiff to turn sounds very, very strange. Have you tried creating a fresh new profile? Is the wheel stiff to turn also in Granity mode?

78

Tested some things with a new profile and I noticed that it was the Damping, Friction and Inertia setting that made the wheel stiffer.

I had following settings:
Damping 3%
Friction 0.75%
Inertia 6%

Should those values make the wheel a lot heavier than without?

79

yes, those will make the wheel heavier. There might also be grainyness, if you have low resolution encoder. I guess you have 5000 PPR / 20000 CPR?

80

Aye, exactly that.

Glad it was only those filters and sorry for making false post. Got a bit worried when wheel suddenly changed. Just have not used those filters before :smiley:

Sent you some Discord PMā€™s too but you can now ignore them. Thanks!

2 Likes
81

what should I be looking for in that?

82

Hmm, just paste it and I will have a look.

83

Its telling me it has too many to post it.

84

Use pastebin.com or similar, or email me at mika dot takala (a) granitedevices dot com

85

Did that work on paste bin? Sorry I never used that before. If it helps any even trying to the debug it was like there was a lag between me and what was happening in simucube. The first click didnā€™t do anything.

86

You will have to give a link that pastebin.com gives after you paste stuff there.

A slight delay is expected, as it downloads the log before showing the dialog window.

87

https://pastebin.com/login I hope thatā€™s what you wanted. Do you have to sign up or does it still work as a guest?
Never mind I tried the link it wasnā€™t right.

88

Command: Request bytedata for analog profile : 14

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 15

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 16

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 17

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 18

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 19

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 20

Command: Event log download request : 0

89

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 2

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 3

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 4

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 5

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 6

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 7

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 8

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 9

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 10

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 11

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 12

90

Command: Request profile number : 0

Command: Request profile name for profile : 0

Command: Request profile byte data for profile : 0

Command: Request profile number : 1

Command: Request profile name for profile : 1

Command: Request profile byte data for profile : 1

Command: Request profile number : 2

Command: Request profile name for profile : 2

Command: Request profile byte data for profile : 2

Command: Request profile number : 3

Command: Request profile name for profile : 3

Command: Request profile byte data for profile : 3

Command: Request profile number : 4

Command: Request profile name for profile : 4

Command: Request profile byte data for profile : 4

Command: Request profile number : 5

91

Command: Request profile byte data for profile : 5

Command: Set calibrated analog axis mode : 0

Command: Request profile number : 0

Command: Request profile name for profile : 0

Command: Request profile byte data for profile : 0

Command: Request profile number : 1

Command: Request profile name for profile : 1

Command: Request profile byte data for profile : 1

Command: Request profile number : 2

Command: Request profile name for profile : 2

Command: Request profile byte data for profile : 2

Command: Request profile number : 3

Command: Request profile name for profile : 3

Command: Request profile byte data for profile : 3

92

Command: Request profile name for profile : 4

Command: Request profile byte data for profile : 4

Command: Request profile number : 5

Command: Request profile name for profile : 5

Command: Request profile byte data for profile : 5

Command: Request hardware settings : 0

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 0

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 1

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 2

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 3

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 4

Command: Request analog input settings : 0

93

Command: Request bytedata for analog profile : 5

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 6

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 7

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 8

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 9

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 10

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 11

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 12

Comma Command: Request bytedata for analog profile : 13

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 14

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 15

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 16

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 17

Command: Request analog input settings : 0

Command: Request bytedata for analog profile : 18

Command: Request analog input settings : 0

Command: Request bytedata for analog profile :nd: Request analog input settings : 0

94

Sorry Mika that was the only way I could get it to work.