forgive, regardless of whether I like the settings …
What explanation does it have to put the turn at 1200 °, and not the Universal 900 °?
because most have it at 900 ° …
Its a personal habit more than anything else. I will usually set the steering range to the maximum that each game allows, match that setting in the driver and let the game take care of the rest.
900 seems to be the most recommended number given out at the official forums and I believe the majority or people use that number.
There isn’t a performance gain to be had by using 1200, 1080 or 900 so any choice is fine as long as the settings match up 
inside ACC you have to put the Dynamic Damping value of 0?
Because it seemed to me to read in the official ACC forums what is recommended to leave it at 100.
Dynamic damping is gyro and damping effect (via constant force) together. It does eat some details but
- stabilizes oscillation
- slows SAT after slides so wheel does not jerk back when tires gain traction
then advisable to leave it at 100% for what you say?
I don’t advise anything, test it and see what you like better, more details or smoother SAT return. With adjustable slider you can find a good compromise between two.
Thank you very much !
and what configuration do you have of simucube?
because I also read that it had to be put 330 hz.
Unlimited, Recon 3
“Post must be 20 characters” 
1 Like
Hi Clumsy,
I have been struggling with ffb on ACC and your Settings were by far the one I liked the most.
Thanks.
Hi gio,
glad, the settings work for you, too 
I just took two races from the official server, 45min and 1h.
engine is very hot.
It is normal?
Or is it that I have some wrong configuration?
Normally this engine laughs at us, and nothing should get hot.
Hey guys. Going down the straights if I let go of the wheel for a second it violently shakes left and right. Any ideas to ease it?? 
Dynamic Damping at 100%.
Hey! That definitely helped thank you. I still have a constant vibration coming through the wheel that is more like a buzz if you have any ideas on that one? Makes my hands numb haha
Sounds like recon filter is too low. Hard to tell without looking at the settings.
These are for SC2 but should translate just fine, except that SC1 does not have Ultra Low Latency filter and scale for effects is different, so 5% would be 0.5.
Hey! I am using clumsy’s settings above but will certainly give yours a go now!! Thank you. It is quite distracting. Total noob with simucube so sure I will get there eventually hehe
Hi,
Just installed the new firmware and ask myself few questions :
DirectInput Effects
Just discover the “active” colum and the different states ; just would like to know about damping setting :
ACC has Dynamic damping (100% in game for me), slider in Simucube DirectInput section reduce or increase the ingame effect ?
Is it usefull to add Simucube Damping effect (Other Filters section) ?
Overall strength
Is there any difference about those settings :
-
SImucube Overall strength : 100% - ACC Force Feedback Gain : 25%
-
SImucube Overall strength : 50% - ACC Force Feedback Gain : 45%
In another words, is it better to use the total Overall strength of the OSW or not ?
Thanks for advices 
2 Likes
I use 100% sc 1, and 35-40% in ACC.
Ac1 Augury 30nm.
I am wondering about car feel on Suzuka track. Sector 1 feels too smooth like no FFB through the corners and no front tyre scrub feeling. It is weird, all other tracks feel great - it is not any one particular car either. Maybe it is the track and the surface is super smooth. Thoughts?
Using an SC2 Pro.