Have you ever had that?
Simucube freshly installed,
you release the emergency stop,
then the steering wheel turns infinitely to the left.
Just press the emergency stop it stops again.
What could that be?
Best wishes from Germany, Manuel
Run the Motor Configuratoin Wizard again and report back if that fixes the issue.
Thank you, we will try it.
If that does not fix the issue, and this is a new DIY build, then you must either toggle AXI invert setting in Granity OR switch any two motor phase wires. The torque command - already from centering spring or even friction or inertia effect, will cause this when phase wires are wired wrong.
Thank you, all works fine.
1 Like