Thanks for the Public release its a nice improvement over mmos!
I am having problem…
What I have done is according this link, Case B and upload the bootloader into my simucube.
After that all stuck, MMos cannot recognize my wheel, also cannot see STM32 bootloader in device manager…
I think I cant handle this beta FW, How can I rollback to previous version ?
My Granity is version1.11
Thank you very much.
1 Like
After flashing, you should see SimuCUBE in Firmware Update Mode in device manager.
If you do, then you can not use MMOS anymore. You must you the new SimuCUBE Configuration Tool and click Update Firmware in there.
1 Like
I’ve just updated the User Guide to include a link to my install video, and there is also step-by-step install guide (by Brion) to which I added pictures from the video. Hopefully this will help many.
https://granitedevices.com/wiki/SimuCUBE_Firmware_User_Guide
2 Likes
Thank you for really quick reply Mika.
I have set it successfully.
Do I still need to use with granity as well ?
And where to set the strength of force ? Many many index are grey out.
You will only need Granity if you want to setup new encoder settings or play with MMC values. Note, that you must press the “Enable IONI USB Configuration” button if you wish to do so.
Many settings are greyed out? Add a new profile, then you can edit it.
1 Like
Hi,
I have just installed this first beta release. Good job so far!
As I would like to make some comparisons with MMOS, what is the process to flash back the Simucube with MMOS firmware?
Thank you.
Cyril
You will have to manually set the SimuCUBE into DFU mode using the dip switch, and then reflash the MMOS dfu file using DfuSeDemo.
1 Like
Do you mean to open the controller box and switch on the simucube board ?
Is there any user guide which describe each function of new configure tool ?
It is linked right on top of the page that is linked on the first post:
https://granitedevices.com/wiki/SimuCUBE_Firmware_User_Guide
1 Like
Guys, here are AKM53K files for both BiSS and SinCos encoders, which you can adapt for your AKM servos - you will need to change at leasr RPM, MMC and MCC, as well as bits for BiSS and interpolation for SinCOS: https://www.dropbox.com/s/f9jcan2z1ia54zc/SimuCUBE_AKM_BiSS_SinCOS14JULY2017.zip?dl=0
I seem to notice a trend iracing crashes during launch. sometimes i need to launch in 3 or 4 times before the game works. it only happens when i got the SimuCUBE running. it never happened with mmos. but since i run the simucube firmware. when i finally get ingame its stable.
the error is a The instruction at XXXXXXXXXXXXXXX referenced memory at XXXXXXXXXX the memory could not be read
There have now been two reports of the SimuCUBE seeminly causing that. Thanks for reporting.
i also have been running Asetto Corsa for hours on multiple days, didn’t have any problems there.
I do have the same error BUT only in iRacing IF I used another sim like Assetto Corsa or pCars2 before! A restart of the PC fixes it and it never happens if I just start playing iRacing from the get go.
Hello SKeijmel, something similar happens to me, also with AMS, iracing, ac, and rf2, but when I’m back to Mmos it has stopped happening …
OK, thanks for reporting.
I’ll put this thing on my list to investigate, but as it seems to not always happen, the reason for it could be hard to find. I will focus on some other things first.
I have the same kind of crash. In the closed beta and now also in the public beta. I’m back to MMOS until there are attempts to fix the issue.
