SC2 ultimate problem

Simucube 2 Simucube 2 Questions
1

I’m trying to help a friend with SC2 Ultimate, he always gets overvoltage in error. 442001
It does not even allow you to set up the permanent center, since it enters into error.

Timestamp : 2034
Wireless: State change : 2
Simucube Boot : 1
Simucube Boot : 0
Simucube Boot : 18
Flash settings data loaded : 0
First-time drive initialization : 0
Initial config has been previously performed. Initializing Drive. : 0
State: Initializing Drive : 0
Drive Firmware update : 0
Drive firmware updated successfully : 0
Timestamp : 3799
Wireless: State change : 3
Wireless: Scan response : 202
Timestamp : 3811
Wireless: State change : 4
Timestamp : 3843
Wireless: State change : 5
Timestamp : 3846
Wireless: Task change : 2
Wireless: Connection parameters : 1
Wireless: Connection parameters : 6
Wireless: Connection parameters : 0
Wireless: Connection parameters : 50
Wireless: Connection parameters : 27
Wireless: Connection parameters : 1
Wireless: Connection parameters : 6
Wireless: Connection parameters : 0
Wireless: Connection parameters : 50
Wireless: Connection parameters : 251
Timestamp : 3875
Wireless: Task change : 3
Timestamp : 3895
Wireless: Procedure completed : 0
Wireless: Configuration Data : 0
Wireless: Configuration Data : 1
Timestamp : 3918
Wireless: Procedure completed : 0
Wireless: Connection parameters : 1
Wireless: Connection parameters : 6
Wireless: Connection parameters : 0
Wireless: Connection parameters : 50
Wireless: Connection parameters : 251
Timestamp : 3935
Wireless: Procedure completed : 0
Wireless: Configuration Data : 1
Wireless: Configuration Data : 1
Timestamp : 3958
Wireless: Procedure completed : 0
Timestamp : 3973
Wireless: Procedure completed : 0
Wireless: Configuration Data : 10
Wireless: Configuration Data : 42
Timestamp : 4007
Wireless: Procedure completed : 0
Timestamp : 4026
Wireless: Procedure completed : 0
Wireless: Configuration Data : 11
Wireless: Configuration Data : 42
Timestamp : 4060
Wireless: Procedure completed : 0
Timestamp : 4066
Wireless: Task change : 4
Command: Request profile number : 0
Timestamp : 4101
Wireless: Procedure completed : 0
Timestamp : 4105
Wireless: Task change : 5
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Timestamp : 4138
Wireless: Procedure completed : 0
Timestamp : 4142
Wireless: Task change : 6
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Wireless: Low RSSI detected : 2
Command: Request profile number : 2
Timestamp : 4177
Wireless: Procedure completed : 0
Timestamp : 4180
Wireless: Task change : 7
Timestamp : 4184
Wireless: Task change : 0
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request hardware settings : 0
Wireless: Low RSSI detected : 34
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Wireless: Battery Voltage : 3631
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Drive init stage 1, position : 2078
Read MMC value from Drive : 28500
Read Motor Resistance value from Drive : 1155
Read CPR from Drive : 16777216
Read Drive Version ID from drive : 40000
Simucube 2 Serial Number : 2919
SM Watchdog disabled successfully : 0
Successfully applied DRC data to Drive : 0
Read MMC value from Drive : 28500
Read Motor Resistance value from Drive : 1155
Read CPR from Drive : 16777216
Read Drive Version ID from drive : 40000
Simucube 2 Serial Number : 2919
Waiting for servo to be ready : 0
Drive init stage 3, position after faults cleared : 2076
Drive init stage 4, phasing, current position : 2078
Drive init stage 4, phasing, current position : 2118
Drive init stage 4, phasing, current position : 2126
Drive init stage 4, phasing, current position : -3872
State: Drive initialization was successful : 0
State: Set baudrate : 0
SM Watchdog enabled successfully : 0
SMBus baudrate initialized successfully : 4500000
State: Before operational - calculating new constant values : 0
State: Operational : 0
event 260 : 0
event 261 : 0
event 262 : 0
Wireless: Uptime : 89
Wireless: Battery Voltage : 3629
Wireless: Uptime : 90
Wireless: Battery Voltage : 3632
Wireless: Uptime : 91
Wireless: Battery Voltage : 3632
Wireless: Uptime : 92
Wireless: Battery Voltage : 3631
Command: Unset temporary centering mode : 0
Command: Set wheel center here : 0
event 96 : 16209480
Command: Request hardware settings : 0
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Wireless: Uptime : 93
Wireless: Battery Voltage : 3631
Wireless: Uptime : 94
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Wireless: Battery Voltage : 3631
Wireless: Uptime : 95
Wireless: Battery Voltage : 3629
Wireless: Uptime : 96
Wireless: Battery Voltage : 3632
Wireless: Uptime : 97
Wireless: Battery Voltage : 3631
Wireless: Uptime : 98
Wireless: Battery Voltage : 3631
Wireless: Uptime : 99
Wireless: Battery Voltage : 3632
Wireless: Uptime : 100
Wireless: Battery Voltage : 3630
Wireless: Uptime : 101
Wireless: Battery Voltage : 3631
Wireless: Uptime : 102
Wireless: Battery Voltage : 3631
Wireless: Uptime : 103
Wireless: Battery Voltage : 3630
Wireless: Uptime : 104
Wireless: Battery Voltage : 3630
Wireless: Uptime : 105
Wireless: Battery Voltage : 3631
Wireless: Uptime : 106
Wireless: Battery Voltage : 3634
Wireless: Uptime : 107
Wireless: Battery Voltage : 3631
Wireless: Uptime : 108
Wireless: Battery Voltage : 3632
Wireless: Uptime : 109
Wireless: Battery Voltage : 3632
Wireless: Uptime : 110
Command: Activate profile number : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Wireless: Battery Voltage : 3632
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 4
Command: Set profile bytedata for profile : 4
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 4
Command: Set profile bytedata for profile : 4
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Set settings not changed : 0
Wireless: Uptime : 111
Wireless: Battery Voltage : 3632
Wireless: Uptime : 112
Wireless: Battery Voltage : 3629
Wireless: Uptime : 113
Wireless: Battery Voltage : 3631
Wireless: Uptime : 114
Wireless: Battery Voltage : 3631
Wireless: Uptime : 115
Wireless: Battery Voltage : 3629
Wireless: Uptime : 116
Wireless: Battery Voltage : 3630
Command: Set temporary centering mode : 0
Command: Set wheel center here : 0
event 96 : 16140973
Wireless: Uptime : 117
Wireless: Battery Voltage : 3632
Wireless: Uptime : 118
Wireless: Battery Voltage : 3632
Wireless: Uptime : 119
Wireless: Battery Voltage : 3584
Wireless: Uptime : 120
Wireless: Battery Voltage : 3630
Wireless: Uptime : 121
Wireless: Battery Voltage : 3631
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Wireless: Uptime : 122
Wireless: Battery Voltage : 3629
Wireless: Uptime : 123
Wireless: Battery Voltage : 3630
Wireless: Uptime : 124
Wireless: Battery Voltage : 3630
Wireless: Uptime : 125
Wireless: Battery Voltage : 3631
Wireless: Uptime : 126
Wireless: Battery Voltage : 3630
Wireless: Uptime : 127
Wireless: Battery Voltage : 3632
Wireless: Uptime : 128
Wireless: Battery Voltage : 3630
Wireless: Uptime : 129
Wireless: Battery Voltage : 3632
Wireless: Uptime : 130
Wireless: Battery Voltage : 3630
Wireless: Uptime : 131
Wireless: Battery Voltage : 3631
Wireless: Uptime : 132
Command: Reload settings from flash : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Wireless: Battery Voltage : 3632
Wireless: Uptime : 133
Wireless: Battery Voltage : 3629
Wireless: Uptime : 134
Wireless: Battery Voltage : 3629
Command: Reload settings from flash : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Wireless: Uptime : 135
Wireless: Battery Voltage : 3629
Wireless: Uptime : 136
Wireless: Battery Voltage : 3629
Wireless: Uptime : 137
Wireless: Battery Voltage : 3630
Wireless: Uptime : 138
Wireless: Battery Voltage : 3630
Wireless: Uptime : 139
Wireless: Battery Voltage : 3629
Command: Unset temporary centering mode : 0
Command: Set wheel center here : 0
event 96 : 405697
Command: Request hardware settings : 0
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Wireless: Uptime : 140
Wireless: Battery Voltage : 3632
Wireless: Uptime : 141
Wireless: Battery Voltage : 3630
Wireless: Uptime : 142
Wireless: Battery Voltage : 3626
Wireless: Uptime : 143
Wireless: Battery Voltage : 3630
Wireless: Uptime : 144
Wireless: Battery Voltage : 3631
Wireless: Uptime : 145
Wireless: Battery Voltage : 3630
Wireless: Uptime : 146
Wireless: Battery Voltage : 3629
Command: Event log download request : 0

2

interesting. Does it go to that error if he pressed e-stop right after the wheel has initialized and the Operating Mode indicates “Operational”?

3

the steering wheel is not involved even if you turn everything off and on again as soon as you require permanent centering from that error. often you have to press the button several times e-stop

4

I had centering problems when too much profiles are saved to SC2, 70 or more

5

Only 4 profile, even in the game it is as if it had no strength, and the centering is always removed

6

I don’t know if it can help, but the engine also gets very hot

7

I made a video to show the problem. After a while, detaching and reattaching the correnter seemed to work, but the steering wheel was not centered. After centering, the problem arose again.

8

Timestamp : 2034
Wireless: State change : 2
Simucube Boot : 1
Simucube Boot : 0
Simucube Boot : 18
Flash settings data loaded : 0
First-time drive initialization : 0
Initial config has been previously performed. Initializing Drive. : 0
State: Initializing Drive : 0
Drive Firmware update : 0
Drive firmware updated successfully : 0
Timestamp : 3795
Wireless: State change : 3
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Drive init stage 1, position : 15094
Read MMC value from Drive : 28500
Read Motor Resistance value from Drive : 1155
Read CPR from Drive : 16777216
Read Drive Version ID from drive : 40000
Simucube 2 Serial Number : 2919
SM Watchdog disabled successfully : 0
Successfully applied DRC data to Drive : 0
Read MMC value from Drive : 28500
Read Motor Resistance value from Drive : 1155
Read CPR from Drive : 16777216
Read Drive Version ID from drive : 40000
Simucube 2 Serial Number : 2919
Waiting for servo to be ready : 0
Drive init stage 3, position after faults cleared : 15092
Drive init stage 4, phasing, current position : 15089
Drive init stage 4, phasing, current position : 15169
Drive init stage 4, phasing, current position : 15181
Drive init stage 4, phasing, current position : 14716
State: Drive initialization was successful : 0
State: Set baudrate : 0
SM Watchdog enabled successfully : 0
SMBus baudrate initialized successfully : 4500000
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
event 260 : 0
event 261 : 0
event 262 : 0
Command: Unset temporary centering mode : 0
Command: Set wheel center here : 0
event 96 : 16695588
Command: Request hardware settings : 0
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Activate profile number : 1
State: Before operational - calculating new constant values : 0
State: Operational : 0
Wireless: Scan response : 202
Timestamp : 45766
Wireless: State change : 4
Timestamp : 45799
Wireless: State change : 5
Timestamp : 45801
Wireless: Task change : 2
Wireless: Connection parameters : 1
Wireless: Connection parameters : 6
Wireless: Connection parameters : 0
Wireless: Connection parameters : 50
Wireless: Connection parameters : 27
Wireless: Connection parameters : 1
Wireless: Connection parameters : 6
Wireless: Connection parameters : 0
Wireless: Connection parameters : 50
Wireless: Connection parameters : 251
Timestamp : 45826
Wireless: Task change : 3
Timestamp : 45844
Wireless: Procedure completed : 0
Wireless: Configuration Data : 0
Wireless: Configuration Data : 1
Timestamp : 45866
Wireless: Procedure completed : 0
Wireless: Connection parameters : 1
Wireless: Connection parameters : 6
Wireless: Connection parameters : 0
Wireless: Connection parameters : 50
Wireless: Connection parameters : 251
Timestamp : 45884
Wireless: Procedure completed : 0
Wireless: Configuration Data : 1
Wireless: Configuration Data : 1
Timestamp : 45906
Wireless: Procedure completed : 0
Timestamp : 45922
Wireless: Procedure completed : 0
Wireless: Configuration Data : 10
Wireless: Configuration Data : 42
Timestamp : 45953
Wireless: Procedure completed : 0
Timestamp : 45967
Wireless: Procedure completed : 0
Wireless: Configuration Data : 11
Wireless: Configuration Data : 42
Timestamp : 45999
Wireless: Procedure completed : 0
Timestamp : 46006
Wireless: Task change : 4
Timestamp : 46038
Wireless: Procedure completed : 0
Timestamp : 46042
Wireless: Task change : 5
Timestamp : 46072
Wireless: Procedure completed : 0
Timestamp : 46077
Wireless: Task change : 6
Timestamp : 46109
Wireless: Procedure completed : 0
Timestamp : 46112
Wireless: Task change : 7
Timestamp : 46116
Wireless: Task change : 0
Wireless: Low RSSI detected : 8
Wireless: Battery Voltage : 3624
Wireless: Uptime : 1
Wireless: Battery Voltage : 3627
Wireless: Uptime : 2
Wireless: Battery Voltage : 3623
Wireless: Uptime : 3
Wireless: Battery Voltage : 3624
Wireless: Uptime : 4
Wireless: Battery Voltage : 3624
Command: Event log download request : 0

9

Interesting. Especially the wheel spin is something that we are investigating right now with one other Simucube 2 Ultimate device.

I would be able to set it up to use the non-absolute wheel center mode (encoder recalibration on every start), that should fix the issue.

10

Mika, I don’t think the owner wants to recalibrate every time he turns it back on … I also tried the momentary calibration, but that was also a problem.

11

Do you think it is appropriate to open a Support Ticket with simtag?

12

The calibration on each start -setting is not something that you are able to do via the UI at the moment. It can only be done via a special service menu.

13

tell me how you want to proceed if you want to do an assistance session directly with him

14

Mika, tell me what to do, Do I have to open a service ticket with the dealer? or can you take care of it?

15

I would be able to help, but does your friend speak English at all - I would need some help from him in a remote support session.

16

you can organize tell me only when you are available and in what ways you want to do it

17

We will continue in a private message.

1 Like