I got a Simucube 2 sport on Saturday and I have had nothing but issues since I got it. I am having losses of ffb while racing that are relatively random. I have hands off detection off as well as clipping notification off so get rid of any beeps I can. While driving I will get a series of beeps. Sometimes just one beep, sometimes 2, sometimes 3. With these beeps I usually get a temporary loss of ffb. It can disappear for just an instant with just 1 beep for i can go away for several seconds usually with 2 or 3 beeps. I have even on a few occasions had it completely reset. Once even locking up True drive and I had to reboot both TD and the Simucube to get it working again.
I have mad sure all cables are plugged in appropriately. I have tried multiple combinations of USB ports. I don’t usually get any info in the debug when this happens but it was different this time. There are 2 changes in the verbosity that appear in the log just before I sit down to start driving. Everything after that happened during qualifying/a race.
Timestamp : 2034
Wireless: State change : 2
Simucube Boot : 1
Simucube Boot : 1
Simucube Boot : 13
Flash settings data loaded : 0
First-time drive initialization : 0
Initial config has been previously performed. Initializing Drive. : 0
State: Initializing Drive : 0
Drive Firmware update : 0
Drive firmware updated successfully : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Timestamp : 4331
Wireless: State change : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Drive init stage 1, position : 3270457
Read MMC value from Drive : 15500
Read Motor Resistance value from Drive : 1200
Read CPR from Drive : 4194304
Read Drive Version ID from drive : 40000
Simucube 2 Serial Number : 7330
SM Watchdog disabled successfully : 0
Successfully applied DRC data to Drive : 0
Read MMC value from Drive : 15500
Read Motor Resistance value from Drive : 1200
Read CPR from Drive : 4194304
Read Drive Version ID from drive : 40000
Simucube 2 Serial Number : 7330
Waiting for servo to be ready : 0
Drive init stage 3, position after faults cleared : 3270458
Drive init stage 4, phasing, current position : 3270457
Drive init SMP_FAULTS : 0
Drive init SMP_FAULT_LOCATION_ID1 : 0
Drive init SMP_STATUS : 271376
Drive init stage 4, phasing, current position : 3270453
Drive init SMP_FAULTS : 0
Drive init SMP_FAULT_LOCATION_ID1 : 0
Drive init SMP_STATUS : 271384
Drive init stage 4, phasing, current position : 3270453
Drive init SMP_FAULTS : 0
Drive init SMP_FAULT_LOCATION_ID1 : 0
Drive init SMP_STATUS : 271384
Drive init stage 4, phasing, current position : 3271260
Drive init SMP_FAULTS : 0
Drive init SMP_FAULT_LOCATION_ID1 : 0
Drive init SMP_STATUS : 340248
State: Drive initialization was successful : 0
State: Set baudrate : 0
SM Watchdog enabled successfully : 0
SMBus baudrate initialized successfully : 4500000
State: Before operational - calculating new constant values : 0
State: Operational : 0
event 260 : 0
event 261 : 0
event 262 : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Set settings not changed : 0
SMBus baudrate initialized successfully : 4500000
Command: Event log download request : 0
Command: Start event logging : 0
Command: Set eventlog verbosity to level : 1
Command: Event log download request : 0
Command: Start event logging : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 2
Command: Set profile bytedata for profile : 2
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 2
Command: Set profile bytedata for profile : 2
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 2
Command: Set profile bytedata for profile : 2
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 2
Command: Set profile bytedata for profile : 2
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Set settings not changed : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 2
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 2
Command: Set profile bytedata for profile : 2
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Set settings not changed : 0
SMBus baudrate initialized successfully : 4500000
SMBus baudrate initialized successfully : 4500000
SMBus baudrate initialized successfully : 4500000
SMBus baudrate initialized successfully : 4500000
SMBus baudrate initialized successfully : 4500000
Command: Event log download request : 0