In Simcube I used
overall strength 55%
450deg steering range
torque width bandwidth 470hz
reconstruction filter 5
damping 0.45
Friction 0,45
My rf2 settings (may not be best just know the feel)
I did not like it on the Raw setting in the games ffb menu
The immersive one was allot better then used Custom in ffb settings Menu and used the downloaded Jack Spade’s files using the “alternative low comp”. file instantly felt loads better
custom files are definitely the way to go
I mapped the volume and FX ffb adjustment in game to knobs then adjust the cars while on track for feel http://forum.projectcarsgame.com/showthread.php?51628-Jack-Spade-Custom-FFB-Files
will try them all see which i like
I Used the C7r Corvette for testing as currently racing it in RF2 was allot of fun on the Ring happy were i have got with it. Better setting in Simcube setup will be posted so looking forward to trying them
I have been trying to get PC2 to work since yesterday to no avail. AC, RF2, and Raceroom work but not PC2. No FFB at all . I have tried all of the flavours etc.
Any help in troubleshooting this would be very much appreciated.
What type did you use in pc2´options? Custom Wheel does not work.
Also does Everything work like bumpstops etc ?
Would you mind setting up a Little guide how to make this work?
then replace the file called this “ffb_custom_settings.txt” with linked jack spade one in your My Documents/ Project Cars 2 folder/ back it up if you like just re name is fine
i don’t think you get any ffb feel till you adjust or change settings in this file so one below has it done for you you can try the other ones from P Car forum post too http://www.mediafire.com/file/ktx9w3cv1ybr1u3/ffb_custom_settings.txt
the wheel rrange i set in Simucube 450deg the bump stops work like that ok if that is what you mean
The computer voice in this video is bad but very informative video worth watching . there are over 40 things you can adjust in the custom ffb controller file:)
look forward to what people come up with
Tried your settings last night - I LIKE EM but I find different cars with completely different feels, the open wheels don’t feel great at all and will require something else. Mapping the tone and volume is essential,
i have volume and FX mapped to knobs so adjust the car as i am driving going to try low compression file too
feel is so much better. the clip tool in the HUD is good too
Great information. Thank you! Only problem i have now is when i try to map the Wheel turning i get double input failure, both on usb 2 and usb 3. Dont know what to do. (Update its all working now except the force feedback… working on it)
And all of the sudden the Wheel doesent work. did not change a thing, LOL i Think pc2 has some more work to do.
this is nuts
Check- Steam, settings, controller options, make sure all are UN selected.
Close steam. Restart your computer, check again that all are UN Selected. Start PC2,
go straight to assignments, assign left right on wheel, and pedals and paddles.Go to calibrate both pedal and wheel. Then go back to edit assignments and do your buttons. Only then start the actual racing section.
no it was better than using my RF2 setting with 470hz and 5 which had noise from road bumps
using the Jack straw alt standard low file now too still playing but feels very good
this is my rf2 one could you post your P Cars 2 one ?
I’m using TBW of 680 and Jack Spade’s Alt Low Compression FFB setup with good results in PC2. I find the overall steering response feels tighter and more in line with what I get from AC / AMS / rF2 although, less refined. The setup does provide some braking (Wheel-lock) feel too. I changed the Tone and FX to preference and raised the Rec-filter to 3 and it feels quite good overall.
My Wheel and Everything is working now again. However i do not feel any force feedback? using the simucube open beta firmware! Any ideas? I downloaded the jack spades file : ffb_custom_settings.txt and put it in my C:\Users\myname\Documents\Project CARS 2 folder. I have also selected custom in force feedback meny in Project cars 2.
so you have selected custom for wheel and custom in the flavour menu in game like pics in my other post ?
and the Jacks ffb in my docs you renamed to" ffb_custom_settings.txt " replacing the original one ?
it should work seems odd that you have no ffb at all
That feels pretty good too
tried the C7r corvette on the ring still seems bit more noisy road feel over the bumps
did you try my one with the center frequency of 142hz tried 160hz added more noise over bumps, attenuation db -25 and q factor of 2,0 not sure what they do
I took them from from this file seems smoother feel on bumpy tracks will play more with it
Blockquote so you have selected custom for wheel and custom in the flavour menu in game like pics in my other post ?
and the Jacks ffb in my docs you renamed to" ffb_custom_settings.txt " replacing the original one ?
it should work seems odd that you have no ffb at all
Yes I have done exactly as you have done. Just opened iracing and its all good. Can not understand why this happens.
