An new problem, FFB only working to the right side

Manolo · 23 October 2020 08:33

and then only the spring.
now i have it the second time and when i restart my SimuCUBE, then all fine.
The Problem was in AC, then i changed to R3E, but the same.

Any Idea? Using the

Simucube Boot : 1
Simucube Boot : 0
Simucube Boot : 25
Flash settings data loaded : 0
First-time drive initialization : 0
Initial config has been previously performed. Initializing Drive. : 0
State: Initializing Drive : 0
Drive init stage 1, position : 1104836
Read MMC value from Drive : 24000
Read Motor Resistance value from Drive : 1245
Read CPR from Drive : 4194304
Read Drive Version ID from drive : 11201
SM Watchdog disabled successfully : 0
Waiting for servo to be ready : 0
Drive init stage 3, position after faults cleared : 1104836
Drive init stage 4, phasing, current position : 1104836
Drive init stage 4, phasing, current position : 1104834
Drive init stage 4, phasing, current position : 1104922
State: Drive initialization was successful : 0
State: Set baudrate : 0
SM Watchdog enabled successfully : 0
SMBus baudrate initialized successfully : 4500000
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request profile number : 7
Command: Request profile name for profile : 7
Command: Request profile byte data for profile : 7
Command: Request profile number : 8
Command: Request profile name for profile : 8
Command: Request profile byte data for profile : 8
Command: Request profile number : 9
Command: Request profile name for profile : 9
Command: Request profile byte data for profile : 9
Command: Request profile number : 10
Command: Request profile name for profile : 10
Command: Request profile byte data for profile : 10
Command: Request profile number : 11
Command: Request profile name for profile : 11
Command: Request profile byte data for profile : 11
Command: Request profile number : 12
Command: Request profile name for profile : 12
Command: Request profile byte data for profile : 12
Command: Request profile number : 13
Command: Request profile name for profile : 13
Command: Request profile byte data for profile : 13
Command: Request profile number : 14
Command: Request profile name for profile : 14
Command: Request profile byte data for profile : 14
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 4
Command: Set profile bytedata for profile : 4
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 4
Command: Set profile bytedata for profile : 4
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Set settings not changed : 0
Command: Activate profile number : 12
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Activate profile number : 9
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request profile number : 7
Command: Request profile name for profile : 7
Command: Request profile byte data for profile : 7
Command: Request profile number : 8
Command: Request profile name for profile : 8
Command: Request profile byte data for profile : 8
Command: Request profile number : 9
Command: Request profile name for profile : 9
Command: Request profile byte data for profile : 9
Command: Request profile number : 10
Command: Request profile name for profile : 10
Command: Request profile byte data for profile : 10
Command: Request profile number : 11
Command: Request profile name for profile : 11
Command: Request profile byte data for profile : 11
Command: Request profile number : 12
Command: Request profile name for profile : 12
Command: Request profile byte data for profile : 12
Command: Request profile number : 13
Command: Request profile name for profile : 13
Command: Request profile byte data for profile : 13
Command: Request profile number : 14
Command: Request profile name for profile : 14
Command: Request profile byte data for profile : 14
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Command: Activate profile number : 1
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request profile number : 7
Command: Request profile name for profile : 7
Command: Request profile byte data for profile : 7
Command: Request profile number : 8
Command: Request profile name for profile : 8
Command: Request profile byte data for profile : 8
Command: Request profile number : 9
Command: Request profile name for profile : 9
Command: Request profile byte data for profile : 9
Command: Request profile number : 10
Command: Request profile name for profile : 10
Command: Request profile byte data for profile : 10
Command: Request profile number : 11
Command: Request profile name for profile : 11
Command: Request profile byte data for profile : 11
Command: Request profile number : 12
Command: Request profile name for profile : 12
Command: Request profile byte data for profile : 12
Command: Request profile number : 13
Command: Request profile name for profile : 13
Command: Request profile byte data for profile : 13
Command: Request profile number : 14

Manolo · 23 October 2020 08:33

Command: Request profile name for profile : 14
Command: Request profile byte data for profile : 14
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Command: Activate profile number : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Activate profile number : 9
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request profile number : 7
Command: Request profile name for profile : 7
Command: Request profile byte data for profile : 7
Command: Request profile number : 8
Command: Request profile name for profile : 8
Command: Request profile byte data for profile : 8
Command: Request profile number : 9
Command: Request profile name for profile : 9
Command: Request profile byte data for profile : 9
Command: Request profile number : 10
Command: Request profile name for profile : 10
Command: Request profile byte data for profile : 10
Command: Request profile number : 11
Command: Request profile name for profile : 11
Command: Request profile byte data for profile : 11
Command: Request profile number : 12
Command: Request profile name for profile : 12
Command: Request profile byte data for profile : 12
Command: Request profile number : 0
Command: Request profile number : 0
Command: Request profile number : 13
Command: Request profile name for profile : 13
Command: Request profile byte data for profile : 13
Command: Request profile number : 14
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 14
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Command: Activate profile number : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request profile number : 7
Command: Request profile name for profile : 7
Command: Request profile byte data for profile : 7
Command: Request profile number : 8
Command: Request profile name for profile : 8
Command: Request profile byte data for profile : 8
Command: Request profile number : 9
Command: Request profile name for profile : 9
Command: Request profile byte data for profile : 9
Command: Request profile number : 10
Command: Request profile name for profile : 10
Command: Request profile byte data for profile : 10
Command: Request profile number : 11
Command: Request profile name for profile : 11
Command: Request profile byte data for profile : 11
Command: Request profile number : 12
Command: Request profile name for profile : 12
Command: Request profile byte data for profile : 12
Command: Request profile number : 13
Command: Request profile name for profile : 13
Command: Request profile byte data for profile : 13
Command: Request profile number : 14
Command: Request profile name for profile : 14
Command: Request profile byte data for profile : 14
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Command: Activate profile number : 12
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Activate profile number : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Request profile number : 0
Command: Request profile name for profile : 0
Command: Request profile byte data for profile : 0
Command: Request profile number : 1
Command: Request profile name for profile : 1
Command: Request profile byte data for profile : 1
Command: Request profile number : 2
Command: Request profile name for profile : 2
Command: Request profile byte data for profile : 2
Command: Request profile number : 3
Command: Request profile name for profile : 3
Command: Request profile byte data for profile : 3
Command: Request profile number : 4
Command: Request profile name for profile : 4
Command: Request profile byte data for profile : 4
Command: Request profile number : 5
Command: Request profile name for profile : 5
Command: Request profile byte data for profile : 5
Command: Request profile number : 6
Command: Request profile name for profile : 6
Command: Request profile byte data for profile : 6
Command: Request profile number : 7
Command: Request profile name for profile : 7
Command: Request profile byte data for profile : 7
Command: Request profile number : 8
Command: Request profile name for profile : 8
Command: Request profile byte data for profile : 8
Command: Request profile number : 9
Command: Request profile name for profile : 9
Command: Request profile byte data for profile : 9
Command: Request profile number : 10
Command: Request profile name for profile : 10
Command: Request profile byte data for profile : 10
Command: Request profile number : 11
Command: Request profile name for profile : 11
Command: Request profile byte data for profile : 11
Command: Request profile number : 12
Command: Request profile name for profile : 12
Command: Request profile byte data for profile : 12
Command: Request profile number : 13
Command: Request profile name for profile : 13
Command: Request profile byte data for profile : 13
Command: Request profile number : 14
Command: Request profile name for profile : 14
Command: Request profile byte data for profile : 14
Command: Request hardware settings : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 0
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 1
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 2
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 3
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 4
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 5
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 6
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 7
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 8
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 9
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 10
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 11
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 12
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 13
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 14
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 15
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 16
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 17
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 18
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 19
Command: Request analog input settings : 0
Command: Request bytedata for analog profile : 20
Command: Set calibrated analog axis mode : 0
Command: Reset FFB state and empty effects : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set hardware settings data : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile settings for profile : 4
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Set profile name for profile : 4
Command: Set profile bytedata for profile : 4
State: Saving settings to flash : 0
SM Watchdog disabled successfully : 0
SM Watchdog enabled successfully : 0
State: Operational : 0
Command: Set settings not changed : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
State: Before operational - calculating new constant values : 0
State: Operational : 0
Command: Event log download request : 0

Manolo · 23 October 2020 08:34

Reset FFB device state don’t help.

Mika · 23 October 2020 08:42

Very strange. We would need exact steps on how to repeat this…

Manolo · 23 October 2020 08:54

Okay, next time, when it’s happen agein, i write it here
Now i turn it of and on, then should be okay.

Manolo · 23 October 2020 21:50

Okay, i just started the System.
Loaded rF2 and then, its again the problem.
Now, i turn it off and on, alle fine.